17,000 Lumens 3-chip DLP Large Venue Projector

#
Product Code: PT-DW17K
  • 17000 Ansi Lumens
  • WXGA, 3-Chip DLP
  • interchangeable lenses
  • quad lamp system
  • overview
  • specs
  • downloads
  • where to buy

PT-DZ21K

Incredible 17,000 lm of brightness 

Panasonic's unique quad-lamp system, with its new high-power UHM lamps, has helped to make the body extremely compact while providing an astounding 17,000 lm of brightness.

 

Dynamic Iris for a high 10,000:1 contrast ratio 

Panasonic's Dynamic Iris uses a scene-linking aperture mechanism to achieve a remarkable 10,000:1*1 contrast without lowering its high brightness. This helps to reproduce deeper, richer blacks, and provides images with more detailed textures.

 

Detail Clarity Processor 3 gives natural clarity to even the finest details 

This unique Panasonic circuit optimizes the sharpness of each image, based on the super-high-, high-, medium-, and low-frequency components of the extracted image information. The resulting images have more natural, lifelike expression.

 

System Daylight View 2 for enhanced colour perception 

This unique Panasonic technology optimizes image quality to improve the colour perception of the projected image in bright rooms.

With a brightness of 17,000 lm, it provides highly comfortable viewing even in bright lighting, and allows viewers to concentrate easily on the images.

 

DICOM simulation mode*2 

This imaging mode is similar to DICOM part 14, which is a medical imaging standard. It reproduces X-ray images with remarkable clarity.

 

Advanced technologies for excellent image quality 

  • 3D colour management system
  • Full 10-bit image processing
  • Progressive cinema scan (3:2 pulldown)
  • Dynamic sharpness control
  • Digital noise reduction
  • IP conversion
  • AI scene control
  • 2:2 pulldown mode
  • sRGB compatibility
  • Fine-adjustable colour temperature
  • Waveform monitor function

 

 

Low TCO and an environmentally friendly design 

The PT-DW17 projector lowers the total cost of ownership (TCO) because they have a lamp replacement cycle of up to 2,000 hours*3. Their environmentally friendly design also includes a low power consumption of 2,300 W.

Lamp mode Brightness (lumens) Lamp replacement cycle (hours)*3
Quad 17,000 2,000
Triple 12,750 2,600
Dual 8,500 4,000
Single 4,250 8,000

 

 

Four lamp system enables stable, extended operation 

The four-lamp system allows the projector to keep working even if a lamp should fail. The Lamp Relay mode also operates the lamps alternately to enable 24/7 projection. Quad, Triple, Dual and Single Lamp modes can be used.

 

Easy lamp replacement 

For easier maintenance, you can replace the lamp from the rear. This makes it easy to replace a lamp while the projector is still in the mounting bracket or dual stacked.

 

Liquid cooling system attains a high level of reliability 

This new liquid cooling system directly cools the DLP™ chip to improve performance and enable operation up to 45 °C (113 °F)*4.  It allows quiet (49 dB) and versatile use while stabilizing performance.  It also helps to make the body compact. And the system is hermetically sealed, so you don't need to replenish the liquid.

 

Eco filter that needs no maintenance for up to 12,000 hours*5 

The Eco Filter has an electrostatic Micro Cut Filter that collects minute dust particles with an ion effect. It combines with the dust-resistant cabinet to enable long-term use even under harsh conditions. Its maintenance cycle of up to 12,000 hours reduces hassle, and the environmental design lets you wash the filter with water and reuse it.*6

 

Flexible installation 

The wide adjustment range of the powered horizontal/vertical lens shift function can be easily adjusted with the remote control.  The unit can also be rotated 360° vertically, to accommodate various installation conditions. The lens-centered design contributes to easy installation.

 

Multi unit brightness control 

This function automatically corrects the brightness fluctuations that occur over time in the individual projectors of a multi-screen system. Up to eight projectors can be controlled by connecting to each other via a hub, and this can be increased to a maximum of 2,048 projectors by using "Multi Projector Monitoring & Control Software Ver. 2.7."

 

Multi Screen Support System seamlessly connects multiple screens 

The Multi-Screen Support System optimally adjusts multiple screens: Edge blending, colour matching.

Edge Blending
The edges of adjacent screens can be blended and their luminance controlled.

Colour Matching
This function corrects for slight variations in the colour reproduction range of individual projectors.

Multi-Screen Processor
The PT-DW17 can project large, multi-screen images without any additional equipment. Up to 100 units (10 x 10) can be edge-blended at a time.

 

Multiple terminals 

The PT-DW17 has an array of terminals, including DVI-D, HDMI and two RGB inputs.

 

Multi Projector Monitoring and Control Software Ver. 2.7 

Panasonic's original Multi Projector Monitoring & Control Software Ver. 2.7 freeware lets you control and monitor multiple projectors at the same time over a wired LAN. If a problem occurs, an alarm message is sent to the monitoring/controlling PC. The terminal connection area is LED illuminated, and a backlight is provided for the control panel buttons, ensuring smooth and easy operation in the dark.

 

Other valuable features 

  • Mechanical lens shutter with fade in/out effect
  • P-in-P function*7
  • 30 m (98.4 ft) long-range wireless remote control with LED backlight
  • ID assignment for up to 64 units
  • Control device setup function
  • Built-in test pattern
  • Selectable 10-language on-screen menu (English, German, French, Spanish, Italian, Portuguese, Russian, Japanese, Chinese, Korean)
  • RoHS Directive compliant
  • Effective theft prevention with the Startup Logo*8 and chain opening

 

 

Made in Japan 

All PT-DW17 projectors are carefully manufactured at the Panasonic factory in Japan, under strict quality control.
This is another, very important advantage of a Panasonic projector.

 

 

*1 Full on/off, with dynamic iris set to "3".
*2 This product is not a medical instrument. Do not use it for actual medical diagnosis.
*3 The usage environment affects the lamp replacement cycle.
*4 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the fan control is set to HIGH ALTITUDE MODE (for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). When the projector is used with the ET-SFR510 Smoke Cut Filter, the operating temperature range is 0 °C to 35 °C (32 °F to 95 °F), and the projector cannot be used in places at high altitude.
*5 The usage environment affects the filter maintenance cycle.
*6 When washing with water, please follow the procedures listed in the operating instructions. Also, we recommend replacing the filter with a new one after it has been washed and reused twice. If the filter is not sufficiently clean after washing, replace it with a new one.
*7 This function cannot be used with some input signals and selected inputs.
*8 Logo Transfer Software required.

 


If you have a question please fill in this form and we will get back to you as soon as we can.
What is this?

Specs

Model PT-DZ21K PT-DS20K PT-DW17K
Power supply 200-240 V AC, 50/60 Hz (Max current requirements: 12 A @200 V)
Power consumption 2,300 W (0.3 W with STANDBY MODE set to ECO,*1 9 W
with STANDBY MODE set to NORMAL.)
Dissipation BTU Max. 7,848 BTU/hour (without light output: 7,585 BTU/hour)
DLP™ chip Panel size 24.4 mm 
(0.96 inches) diagonal 
(16:10 aspect ratio)
24.1 mm 
(0.95 inches) diagonal 
(4:3 aspect ratio)
21.6 mm 
(0.85 inches) diagonal 
(16:9 aspect ratio)
Display method DLP™ chip x 3, DLP™ projection system
Pixels 2,304,000 
(1,920 x 1,200) x 3,
total of 6,912,000 pixels
1,470,000 
(1,400 x 1,050) x 3,
total of 4,410,000 pixels
1,049,088 
(1,366 x 768) x 3,
total of 3,147,264 pixels
Lens Optional powered zoom and fixed-focus lenses
Lamp 465 W UHM lamp x 4, replacement cycle of up to 2,000 hours*2
Screen size (diagonal) 1.78-15.24 m 
(70-600 inches),
1.78-7.62 m 
(70-300 inches) 
with the ET-D75LE50,
16:10 aspect ratio
1.78-15.24 m 
(70-600 inches),
1.78-7.62 m 
(70-300 inches) 
with the ET-D75LE50,
4:3 aspect ratio
1.78-15.24 m 
(70-600 inches),
1.78-7.62 m 
(70-300 inches) 
with the ET-D75LE50,
16:9 aspect ratio
Brightness*3 20,000 lm 
(four-lamp)
17,000 lm 
(four-lamp)
Center-to-corner uniformity*3 90%
Contrast*3 10,000:1 (full on/off, with dynamic iris set to "3" )
Resolution 1,920 x 1,200 pixels 1,400 x 1,050 pixels
(Input signals that 
exceed this resolution will 
be converted to 
1,400 x 1,050 pixels.)
1,366 x 768 pixels
(Input signals that 
exceed this resolution will
be converted to 
1,366 x 768 pixels.)
Scanning frequency SDI SD-SDI SMPTE ST 259 compliant, [YCBCR 4:2:2 10-bit] 480i, 576i -
HD-SDI SMPTE ST 292 compliant, 
[YCBCR 4:2:2 10-bit] 720/50p, 720/60p, 1035/60i, 1080/50i, 
1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
-
Dual-link HD-SDI SMPTE ST 372 compliant, 
[RGB 4:4:4 12-bit /10-bit] 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p, 
[X´Y´Z´ 4:4:4 12-bit] 2,048 x 1,080/24p, 2,048 x 1,080/24sF
-
3G-SDI SMPTE ST 424 compliant, 
[YPBPR 4:2:2 10-bit] 1080/50p, 1080/60p, 
[RGB 4:4:4 12-bit /10-bit]1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
-
HDMI/DVI-D 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 
1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, 
VGA (640 x 480)-WUXGA*4 (1,920 x 1,200), 
compatible with non-interlaced signals only, dot clock: 25-162 MHz
RGB fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 20-162 MHz
YPBPR (YCBCR)
fH: 15.75 kHz, fV: 60 Hz [480i (525i)]
fH: 15.63 kHz, fV: 50 Hz [576i (625i)]
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1035/60i]
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]
fH: 27.00 kHz, fV: 24 Hz [1080/24p]
fH: 33.75 kHz, fV: 30 Hz [1080/30p]
fH: 56.25 kHz, fV: 50 Hz [1080/50p]
fH: 31.50 kHz, fV: 60 Hz [480p (525p)]
fH: 31.25 kHz, fV: 50 Hz [576p (625p)]
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p]
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i]
fH: 28.13 kHz, fV: 25 Hz [1080/25p]
fH: 27.00 kHz, fV: 48 Hz [1080/24sF]
fH: 67.50 kHz, fV: 60 Hz [1080/60p]
Video/YC fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], 
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift*5 Vertical ±55 % (±44 % with 
the ET-D75LE6)
from center of screen 
(powered)
±50 % (±40 % with 
the ET-D75LE6)
from center of screen 
(powered)
±70 % (±60 % with 
the ET-D75LE6)
from center of screen 
(powered)
Horizontal ±20 % (±15 % with 
the ET-D75LE6)
from center of screen 
(powered)
±30 % (±20 % with the ET-D75LE6)
from center of screen (powered)
Keystone correction range Vertical: ±40°*6, horizontal: ±15° Vertical: ±40°*6
Keystone correction range 
with optional Upgrade Kit
Vertical: ±45°*6*8, horizontal: ±40°*7*8 -
Installation Ceiling/floor, front /rear
Terminals SDI 1 IN BNC x 1 (3G/HD/SD-SDI) -
SDI 2 IN BNC x 1 (HD/SD-SDI) -
3D SYNC IN/OUT BNC x 1 (3D timing signal) -
3D SYNC OUT BNC x 1 (3D timing signal) -
DVI-D IN DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, 
compatible with single link only)
HDMI IN HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
RGB 1 IN BNC x 5 (RGB/YPBPR/YCBCR/YC x 1)
RGB 2 IN D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)
VIDEO IN BNC x 1 (composite video)
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
SERIAL OUT D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
REMOTE 1 IN M3 x 1 for wired remote control
REMOTE 1 OUT M3 x 1 for link control (for wired remote control)
REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel)
LAN RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)
Cabinet materials Molded plastic
Dimensions (W x H x D) 620 x 291*9 x 800 mm (24-7/16" x 11-15/32"*9 x 31-1/2") (optional lens not included)
Weight*10 Approximately 43 kg (94.8 lbs) (optional lens not included)
Shipping dimensions 
(W x H x D)
PT-DZ21KU / DS20KU / DW17KU
PT-DZ21KEJ / DS20KEJ / DW17KEJ
965 x 418 x 865 mm (38" x 16-15/32" x 34-1/16")
PT-DZ21KE / DS20KE / DW17KE 946 x 402 x 846 mm (38" x 15-13/16" x 33-5/16")
Shipping weight PT-DZ21KU / DS20KU / DW17KU 53 kg (116.8 lbs)
PT-DZ21KEJ / DS20KEJ / DW17KEJ 54 kg (119.0 lbs)
PT-DZ21KE / DS20KE / DW17KE 51 kg (112.4 lbs)
Operation noise*3 49 dB (quad lamp operation)
Operating environment Operating temperature: 0-45°C (32-113°F)*11
operating humidity: 20- 80 % (no condensation)
Applicable software Logo Transfer Software, 
Multi Projector Monitoring & Control Software,
Geometry Manager Pro (included in the ET-UK20)
Logo Transfer Software, 
Multi Projector 
Monitoring & Control Software
Supplied accessories Power cord with secure lock, wireless/wired remote control unit, batteries (R6/AA type x 2)
  • * Product numbers vary depending on the market. The general guideline is as follows: The product number in North America and Taiwan is 
    PT-DZ21KU, PT-DS20KU, and PT-DW17KU. The product number in Europe (except for those shipped directly to Europe), CIS, Asia (except Taiwan), 
    Oceania, Middle East, and Africa is PT-DZ21KE, PT-DS20KE, and PT-DW17KE. 
    The product number for the direct shipments to Europe is PT-DZ21KEJ, PT-DS20KEJ, and PT-DW17KEJ.
  • *1 When the STANDBY MODE is set to ECO, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using the serial terminal.
  • *2 The usage environment affects the lamp replacement cycle.
  • *3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
  • *4 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).
  • *5 Optical axis shift cannot be operated with the ET-D75LE50.
  • *6 ±22° with the ET-D75LE50, ±28° with the ET-D75LE6, and ±40° with the ET-D75LE10 and ET-D75LE20.
  • *7 Up to ±15° with the ET-D75LE50 and ET-D75LE6.
  • *8 Up to a total of ±55° during simultaneous horizontal and vertical correction.
  • *9 With legs at shortest position.
  • *10 Average value. May differ depending on the actual unit.
  • *11 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the fan control is set to HIGH ALTITUDE MODE (for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). When the projector is used with the ET-SFR510 Smoke Cut Filter, the operating temperature range is 0 °C to 35 °C (32 °F to 95 °F), and the projector cannot be used in places at high altitude.
NOTES ON USE
1. Do not install the projector in locations that are subject to excessive water, humidity, steam, or oily smoke. Doing so may result in fire, malfunction, or electric shock.
2. The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or extended use.
3. The projector uses of high-wattage lamp that becomes very hot during operation. Please observe the following precautions:
• Never place objects on top of the projector while it is operation.
• Make sure there is an unobstructed space of 500 mm (19-11/16 inches) or more around the projector's exhaust openings.
• Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection. When stacking projector units, be sure to provide the amount of space indicated between them. These space requirements also apply to installation where only one projector unit is operating at one time and the other unit is used as a backup.
• If the projector is placed in a box or enclosure, temperature of the air surrounding the projector must be between 0 °C (32 °F) and 35 °C ( 95 °F). Also make sure the projector's intake and exhaust openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the intake.
4. If the projector is to be operated continuously 24 hours a day / 7 days a week, use the multi-lamp optical system's alternating lamp operation (lamp changer) function. The projector can be operated continuously 24 hours a day / 7 days a week in four-lamp operation mode, but it will automatically operate with three lamps for 8 hours of the 24 hours / 7 days.
5. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
• The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.
6. Because the ET-D75LE50 is a fixed short-throw lens, the lens shift function cannot be used with it.
7. Due to natural characteristics of lamps, screen brightness may vary (flicker). This is not an indication of faulty lamp performance.

Downloads

...