9,600 Lumens 3-chip DLP Large Venue Projector

Product Code: PT-DW90
  • 9,600 Ansi Lumens
  • WXGA, 3-Chip DLP
  • interchangeable lenses
  • dual lamp system
  • 10,000:1 Contrast Ratio
  • overview
  • specs
  • downloads
  • where to buy


Compact yet bright 

Panasonic's original dual-lamp system, with its new 355W lamp, has helped to make the body approximately 49% smaller than Panasonic's original PT-D10000 series, while providing a full 9,600 lm of brightness.


New Dynamic Iris for a high 10,000:1 contrast ratio*1 

Panasonic's new Dynamic Iris uses a scene-linking aperture mechanism to achieve a remarkable 10,000:1*1 contrast without lowering its high brightness. This helps to reproduce deeper, richer blacks, and provides images with more detailed textures.


Detail Clarity Processor 3 brings depth and clarity to details 

The frequency of the video signal is analyzed for each scene, and distribution data is extracted for the ultrahigh, high, medium and low-range frequencies. This unique Panasonic image correction circuit optimally enhances each area of the screen. High-precision detection is applied from 2-dimensional horizontal/vertical data to produce more natural, lifelike images with high definition.


System Daylight View 2 for enhanced colour perception 

This original Panasonic technology optimizes image quality to improve colour perception of the projected image in bright rooms. Gamma curves and sharpness, in addition to conventional colour correction, are adjusted to bring a sense of sharpness to the entire screen and reproduce stunning images with lifelike depth. This results in highly comfortable viewing even in bright lighting, and allows viewers to concentrate easily on the images.


DICOM simulation mode*2 

This imaging mode is similar to DICOM Part 14, which is a medical imaging standard. It reproduces X-ray images with remarkable clarity. It also allows information to be shared by many viewers on a large screen, such as during conferences or training courses.


Advanced technologies for excellent image quality 

  • 3D colour management system
  • Full 10-bit image processing
  • Progressive cinema scan(3:2 pulldown)
  • Dynamic sharpness control
  • Digital noise reduction
  • IP conversion
  • AI scene control
  • 2:2 pulldown mode
  • 3D Y/C separation
  • sRGB compatibility


Panasonic's original dual lamp system 

This system eliminates the interruption if a lamp should fail (in dual-lamp operation mode). The Lamp Relay mode also operates the lamps alternately to enable 24/7 projection.

Lamp Brightness (lumens) Lamp replacement cycle
Two lamps (high) 9,600 3,000
Two lamps (low) 7,680 4,000
One lamp (high) 4,800 6,000
One lamp (low) 3,840 8,000



Auto cleaning filter reduces maintenance hassles 

Panasonic's proprietary Auto Cleaning Filter (ACF) automatically exposes a clean filter surface when it senses that the filter is clogged. The ACF also brushes away dust that adheres to the filter, which helps prevent clogging that can impair operation or cause malfunction. This helps maintain the superior dust-collecting performance of the Micro Cut Filter, which is a highly efficient electrostatic filter. As a result, the filter does not need to be replaced for up to 10,000 hours*4 or more, greatly reducing the hassle of maintenance.


Network function 

Multi Projector Monitoring & Control Software Ver. 2
Panasonic's original freeware "Multi Projector Monitoring & Control Software Ver. 2" allows the user to control and monitor multiple projectors at the same time over a wired LAN. When a problem occurs, an alarm message is sent to the monitoring/ controlling PC. 

Web Browser Control
The PT-DZ110X can be easily operated remotely over a LAN network, because it is done using the computer's familiar web browser. Furthermore, the projector sends an e-mail message to notify the operator when an error has occurred, or a lamp needs to be replaced. 

PJLink™ Compatibility
The LAN terminals support PJLink™ class 1 connection. Control with the same specifications is also possible when used in a multi-projector system with projectors of another brand. 


Quiet 37 dB*5 operation 

An original cooling system enhances the compact body and enables the projector to operate at a silent 37 dB.


Made in Japan 

All PT-DW90X projectors are carefully manufactured at the Panasonic factory in Japan, under strict quality control. This is another, very important advantage of a Panasonic projector.


Flexible installation 

The wide adjustment range of the powered horizontal/vertical lens shift function assures virtually distortion-free images and adds convenience and versatility. It lets you easily make adjustments with the remote control. The unit can also be rotated 360° vertically. This means you can install it at any angle you want, to accommodate different installation conditions. The lens-centered design also contributes to easy installation.


Multi screen support system seamlessly connects multiple screens  

Edge Blending
The edges of adjacent screens can be blended and their luminance controlled.

Colour Matching
This function corrects for slight variations in the colour reproduction range of individual projectors. The PC software assures easy, accurate control.

Multi-Screen Processor
The PT-DW90X can project large, multiscreen images without any additional equipment. Up to 100 units (10 × 10) can be edgeblended at a time.


Multi unit brightness control 

This function automatically corrects the brightness fluctuations that occur over time in the individual projectors of a multi-screen system. A maximum of eight projectors can be controlled by connecting each other via a hub, and this can be increased to a maximum of 2,048 projectors by using "Multi Projector Monitoring & Control Software Ver. 2".


A wide selection of lenses (optional) 

Choose from a wide lineup of lenses for your system, including short-throw, long-throw zoom and fixed-throw lenses for rear projection use. The additional lenses make it easy to adapt your projector to the installation site. The lenses attach and detach with one-touch ease.


Multiple terminals 

The PT-DW90X has an array of terminals to support a broad range of projection needs. Using the serial terminal (RS-232C), it is possible to connect and operate AMX and Crestron control systems with ease.


Easy to use wireless remote control with a maximum operating range of 30m 

This provides greater convenience for large conference rooms, lecture halls and gymnasiums with large audiences. Also, two signal transmission ports are provided to enable a large operating area.


Direct power off 

The cooling fan continues to operate even when the main power switch is turned off after projection is finished. This also allows the power to be turned off by directly switching off the room's main breaker for systems, such as ceiling mounted systems, where the main power switch cannot be reached.


Scheduling function 

Scheduled operation is possible using the built-in timer function, without having to use a PC and software. For example, when using the projector for digital signage in a store, it can be set to operate with two lamps in the daytime and one lamp at night.


A "P in P" function for versatile image effects

 Two different image sources can be simultaneously displayed.*6 The size and position of both main and sub windows can be changed for more flexible and effective image presentations.


Other valuable features 

  • Operation in temperatures up to 45°C (113°F)*7
  • Mechanical lens shutter
  • Anti-theft features with chain opening
  • ID assignment for up to 64 units
  • Built-in test pattern
  • Selectable 9-language on-screen menu (English, German, French, Spanish, Italian, Russian, Japanese, Chinese, Korean)

*1 In Dynamic Iris mode 3.
*2 This product is not a medical instrument. Do not use it for actual medical diagnosis.
*3 The values above are maximum values when they are used in cycles of being turned on for 2 hours and off for 0.25 hours. When the lamps are turned on and off more frequently, the lamp replacement cycle is shortened. It is recommended that the mechanical shutter be used to turn images off for a short period.
*4 The usage environment influences the duration of the filter.
*5 In dual lamp operation, with lamp low mode. Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*6 The P-in-P function cannot be used for some input signals or some selected inputs.
*7 The operating temperature range is 0 °C to 40°C (32°F to 104°F) when the fan control is set to High A ltitude mode ( for over 1,400 m [4,593 ft] to 2,700 m [8,858 ft] above sea level ).

If you have a question please fill in this form and we will get back to you as soon as we can.
What is this?




DLP™ chip

Panel size

21.6 mm (0.85") diagonal, 16:9 aspect ratio

Display method

DLP™ chip x 3 (R, G, B), DLP™ projection system


1,049,088 (1,366 x 768) x 3, total of 3,147,264 pixels


355 W UHM lamp x 2 (dual lamp system)


9,600 lumens (dual lamp, high mode)

Contrast ratio*1

10,000:1 (full on/full off, in Dynamic iris mode 3)


1,366 x 768 pixels
(Input signals that exceed this resolution will be converted to 1,366 x 768 pixels.)


Optional powered zoom/focus lenses 

Screen size

1.78-15.24 m (70-600 inches)*2 (16:9 aspect ratio)

Optical axis shift

Vertical: ±70% (±60% with the ET-D75LE6) from center of screen, powered
Horizontal: ±30% (±20% with the ET-D75LE6) from center of screen, powered

Scanning frequency


Horizontal: 15 - 100 kHz, vertical: 24 - 120 Hz,
dot clock: 162 MHz or lower


525i (480i) : fH 15.75 kHz; fV 60 Hz
625i (576i) : fH 15.63 kHz; fV 50 Hz
525p (480p) : fH 31.50 kHz; fV 60 Hz 
625p (576p) : fH 31.25 kHz; fV 50 Hz 
750 (720)/60p : fH 45.00 kHz; fV 60 Hz 
750 (720)/50p : fH 37.50 kHz; fV 50 Hz 
1035/60i : fH 33.75 kHz; fV 60 Hz 
1125 (1080)/60i : fH 33.75 kHz; fV 60 Hz 
1125 (1080)/50i : fH 28.13 kHz; fV 50 Hz 
1080/25p : fH 28.13 kHz; fV 25 Hz 
1080/24p : fH 27.00 kHz; fV 24 Hz 
1080/24sF : fH 27.00 kHz; fV 48 Hz 
1080/30p : fH 33.75 kHz; fV 30 Hz 
1080/60p : fH 67.50 kHz; fV 60 Hz 
1080/50p : fH 56.25 kHz; fV 50 Hz


Horizontal: 15.75/15.63 kHz, vertical: 50/60 Hz



HDMI 19-pin x 1
Deep Colour, compatible with HDCP, 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p (non-interlaced signals only), VGA (640 x 480)-WUXGA*3 (1,920 x 1,200), dot clock: 25 - 162 MHz


DVI-D 24-pin x 1
DVI 1.0 compliant, compatible with HDCP, compatible with single link only, 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, VGA (640 x 480)-WUXGA*3 (1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25 -162 MHz




D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)


BNC x 1 (composite video)


Mini DIN 4-pin x 1 (S-Video)


D-sub 9-pin (female) x 1 (for external control, RS-232C compliant)


D-sub 9-pin (male) x 1 (for link control, RS-232C compliant)


M3 jack x 1 (for wired remote control)


M3 jack x 1 (for link control)


D-sub 9-pin (female) x 1 (for external control, contact control)


RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)

Keystone correction range

Vertical: ±40° 
(±22° with the ET-D75LE50/D75LE5*4, ±28° with the ET-D75LE6)*5,
horizontal: ±15° (±10° with the ET-D75LE6)*5


Ceiling/floor, front/rear

Power cord length

3.0 m (9 ft 10 in)

Power supply

(North America)

120 V AC, 9.0 A, 60 Hz

(Europe and Asia)

220-240 V AC, 4.8 A, 50/60 Hz

Power consumption

(North America)

920 W (970 VA) 
(0.2 W with standby mode set to ECO*6. 6 W with standby mode set to NORMAL. Both with fan stopped.)

(Europe and Asia)

900 W (950 VA at 240 V)
(0.3 W with standby mode set to ECO*6. 8 W with standby mode set to NORMAL. Both with fan stopped.)

Dimensions (W x H x D)

530 x 200 x 548.5 mm (20-7/8 x 7-7/8 x 21-19/32 inches)
(with legs at shortest position, optional lens not included)


Approximately 24 kg (52.9 lb) without lens

Operating temperature*7

0°C-45°C (32°F-113°F)

Operating humidity

10%-80% (no condensation)

Supplied accessories

Power cord with security lock, wireless/wired remote control unit, batteries for remote control (AA type for North America, R6/LR6 type for Europe and Asia)x 2, safety wire rope



Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.


1.78-7.62 m (70-300 inches) with the ET-D75LE50/D75LE5*4.


WUXGA resolution is supported only when the signals are compliant with VESA CV T-RB (Coordinated Video Timing-Reduced Blanking).


The optional lenses ET-D75LE4/D75LE5 were discontinued.


When using only the KEYSTONE correction. When using both the KEYSTONE and ARC corrections of the Geometric Adjustment function: vertical ±5°, horizontal ±5° (vertical ±10° and horizontal ±15° with the ET-D75LE40/D75LE4*4/D75LE8).


With the standby mode set to ECO. When the standby mode is set to ECO, network functions such as power on over the LAN network will not operate, and the serial output terminal cannot be used. Also, only cer tain commands can be received for external control using the serial terminal.


The operating temperature range is 0°C (32°F) to 40°C (104°F) when used in High-Altitude mode (1,400 m (4,593 ft) to 2,700 m (8,858 ft)).