Compact, expandable, multi-format HD/SD video switcher with 9+ inputs.

Power Requirement: 

AC 100V to 240V, 50Hz/60Hz, 8 W

Operating Temperature: 

0°C to 40°C

Operating Humidity: 

10 % to 90 % (no condensation)

Dimensions (W x H x D): 

440mm x 158mm x 361mm excluding protrusions

Weight: 

Approx. 6.2Kg excluding accessory parts when no options have been installed
Approx. 6.6Kg excluding accessory parts when all the possible options have been installed

Video Inputs (13 signal lines maximum): 

Standard SDI: 8 signal lines, BNC x 8 (SDI INPUT 1 to SDI INPUT 8)

(The up-converter function can be used for the SDI INPUT 5 to SDI INPUT 8 connectors.)

Optional: Up to 4 additional signal lines (IN A1, IN A2, IN B1, IN B2)

(Up to two option boards can be installed in the two input/output slots.)

Video Outputs (10 signal lines, maximum): 

Standard SDI: 5 signal lines, BNC x 6

(SDI OUTPUT 1 to SDI OUTPUT 5 x 1 line each, 2 distributed outputs for SDI OUTPUT 1 only)

Standard DVI-D: 1 signal line, DVI-D x 1

Optional: Up to 4 additional lines (OUT A1, OUT A2, OUT B1, OUT B2)

• PGM, PVW, AUX1 to AUX4, MV (MULTI_VIEW), CLN, KEYOUT and MEM PVW can be assigned to SDI OUTPUT 1 to SDI OUTPUT 5, DVI D OUT, OUT A1, OUT A2, OUT B1 and OUT B2.
• CLN can be pre-selected from KEY or DSK using a menu. (Up to two option boards can be installed in the two input/output slots.)

Signal Formats: 

SD: 480/59.94i, 576/50i

HD: 1080/59.94i, 1080/50i, 720/59.94p, 720/50p, 1080/24PsF*,1080/23.98PsF*

*The following option boards do not support 1080/24PsF: AV-HS04M1, AV-HS04M2, AV-HS04M3, AV-HS04M4, AV-HS04M5, AV-HS04M6, AV-HS04M7

Signal Processing: 

Y: PB: PR 4: 2: 2, 10 bit (8 bits for video memory), RGB 4:4:4, 8 bit

ME Number: 

1 ME

SDI Inputs: 

HD-SDI: HD Serial digital (SMPTE 292M)

SD-SDI: SD Serial digital (SMPTE 259M)

8 signal lines, standard: IN1 to IN8

12 signal lines, maximum: IN A1, IN A2, IN B1, IN B2

(When two AV-HS04M1 boards are used; with active through)

HD: SMPTE 292M (BTA S-004B) standard complied with

• 0.8 V [p-p] ±10 % (75 Ω)
• Automatic equalizer More than 100 m (328 ft)
  
  (when 1.5 Gbps/5C-FB cable is used)
  SD: SMPTE 259M standard complied with
• 0.8 V [p-p] ±10 % (75 Ω)
• Automatic equalizer 200 m (656 ft) (when 5C-2V cable is used)

SDI Outputs: 

HD-SDI: HD Serial digital (SMPTE 292M)

SD-SDI: SD Serial digital (SMPTE 259M)

5 signal lines, standard: OUT1 x 2; OUT2 to OUT5 x 1 each

9 signal lines, maximum: OUT A1, OUT A2, OUT B1, OUT B2

(When two AV-HS04M7 boards are used)

HD: SMPTE 292M (BTA S-004B) standard complied with

• Output level 0.8 V [p-p] ± 10 %
• Rise time HD: Less than 270 ps
• Fall time HD: Less than 270 ps
• Difference between rise time and fall time
  
  HD: Less than 100 ps
• Alignment jitter HD: Less than 0.2 UI (130 ps)
• Timing jitter HD: Less than 1.0 UI
• Eye aperture ratio More than 90 %
• DC offset 0 ±0.5 V
  
  SD: SMPTE 259M standard complied with
• Output level 0.8 V [p-p] ±10 %
• Rise time Less than 1.5 ns
• Fall time Less than 1.5 ns
• Difference between rise time and fall time
  
  Less than 0.5 ns
• Jitter Less than 0.2 UI

DVI-I Input(Option board) (Built-in): 

Digital RGB:

XGA (1024 x 768), WXGA (1280 x 768), SXGA (1280 x 1024),

WSXGA+ (1680 x 1050), UXGA (1600 x 1200), WUXGA (1920 x 1200)

Vertical frequency: 60 Hz

Video format inputs:

Digital RGB: 1080/50p, 1080/59.94p

Vertical frequency: Same as system formats

Video format outputs:

Digital RGB: 1080/50p, 1080/59.94p, 1080/50i, 1080/59.94i, 720/50p, 720/59.94p

• The input and output of analogue signals are not supported.
• Output support the high-resolution multi view mode:
  
  Signals are output with a high resolution even when SD is set as the system mode. (When high-resolution multi view mode has been enabled, MV is selected as the DVI-D OUT output, and it is not possible to select MV with SDI OUT.)
• This connector does not support the HDCP technologies.
  
  Standard input/output: 1 line each (DVI-D IN, DVI-D OUT)
• The DVI-I connector cable cannot be used.
• For the DVI-D connector cable, use a cable with a length of up to 5 m (16.4 ft).

Reference Input/Output: 

In GENLOCK mode: Black burst or Tri-level Sync input signals

(with loop-through) In internal sync mode: Black burst output signals x 2

• Same field frequencies as those of the system formats supported.
• With the 1080/24PsF format, only GENLOCK mode supported.
• With the 1080/23.98PsF format, black burst with 10F-ID
  
  (SMPTE318M standard met) or TRI signals supported.

Video Delay Time: 

1 line (H), When the frame synchronizer setting is "Off" and the up-converter setting is "Off".

1 frame (F), When the frame synchronizer setting is "On" or the up-converter setting is "On".

• When the signals have passed through PinP, DVE, multi view, down-converter, DVI-IN or DVI-OUT, a maximum delay of 1 frame is applied in each case.

Control I/O (LAN): 

RJ-45

LAN 10BASE-T/100BASE-TX (For IP control)

Connecting cable: LAN cable (category 5 or above), max. 100m, STP (Shielded Twisted Pair) cable recommended

• When connecting to a hub (switching hub), use a straight cable.
  
  Use a crossover cable when connecting the unit and computer on a 1:1 basis without going through a hub.
• Use with the same segment is recommended for the equipment which is connected to the unit. If the unit is connected to equipment whose segments are different, events dependent upon the settings inherent to the network equipment, for instance, 
  
  may occur so, thoroughly check the connections with the equipment to which the unit will be connected prior to the start of operation

Control I/O (EDITOR): 

D-sub, 9-pin, female

EDITOR Used to control an editor

RS-422 control connector

Communication format

Baud rate: 38400 bps, Character length: 8 bit, Parity: Odd

Stop bit: 1 bit, Flow control: None

Control I/O (COM):: 

D-sub, 9-pin, female

COM Used to control an external device RS-422 control connector

Communication format (selected using a menu)

• Mode: 1 (default setting), Baud rate: 9600 bps, Character length: 8 bit
  
  Parity: None, Stop bit: 1 bit, Flow control: None
• Mode: 2, Baud rate: 38400 bps, Character length: 8 bit, Parity: Odd
  
  Stop bit: 1 bit, Flow control: None
• Mode: 3, Baud rate: 38400bps,Character length: 8bit,Parity: None
  
  Stop bit: 1 bit, Flow control: None

Control I/O: 
(TALLY/GPI 
TALLY/GPI 2): 

D-sub, 15-pin, female ( x 2)

1 Input: 8 inputs, general-purpose, photocoupler sensing

Output: 19 outputs; selected from R/G tally, general-purpose

Alarm: 1 output, open collector output (negative logic)

Other: 

BOOT switch [SV/NM (service/normal) ] (for maintenance purposes) Normally, this switch is used as the "NM" position.